Honda Motor Co., Ltd. will release the Honda MTX200R, an on- and off-road bike equipped with a water-cooled, two-stroke, single-cylinder engine (total displacement 193 cm3 ), which allows for comfortable riding on rough terrain and in urban areas, on February 5th.
The engine installed in the MTX200R is lightweight and compact, utilizing a number of technologies acquired from motocross races both in Japan and overseas, and delivers a high output of 26 PS/7,500 rpm and 130 horsepower per liter. In particular, the adoption of Honda's unique ATAC (Automatic Adjusting Torque Amplification Exhaust System) provides powerful performance at high rpm and tenacious, flat torque performance at mid- to high-rpm. This allows you to enjoy powerful and smooth riding from low to high speeds. Furthermore, this engine, combined with the thoroughly lightweight (dry weight 102 kg) and compact body, achieves the smallest power-to-weight ratio of 3.92 kg/PS among domestic on- and off-road vehicles.
The suspension uses the well-known Pro-Link rear suspension and the front air-assisted suspension with Honda's unique fork mechanism (which reduces friction between the fork pipe and bottom case), allowing it to demonstrate excellent road-following performance from rough ground to paved roads. The slim body provides good foot reach while ensuring a road clearance of 285mm, making it ideal for riding on rough roads. Combined with the seat that is laid out all the way to the top of the tank, it allows the rider to obtain an appropriate riding position according to the road conditions.
Sales plan is
Planned domestic sales of 6,000 units per year
Standard cash price is is 289,000 yen.
(Prices for Hokkaido and Okinawa are 5,000 yen higher. Excluding some remote islands)
Other key features
●6-speed return gears for full enjoyment on technical runs.
●Large front fender with air intake to improve the radiator's cooling effect.
●Square cross-section hollow rear fork made of lightweight, high-rigidity high-tensile steel tubes.
●110mm front and rear brakes provide powerful braking power.
●The speedometer and tachometer are set at an easy-to-read angle, and various indicators are laid out functionally.
●Changeable brake pedal.
●Square halogen headlights (35W/36.5W) are more effective for night driving
●Dog-leg type lever with excellent operability.
●Both front and rear wheels feature aluminum rims.
Main specifications
Model MD07
Total length (m) 2.085
Overall width(m) 0.830
Total height (m) 1.175
Wheelbase(m) 1.350
Minimum ground clearance(m) 0.285
Seat height(m) 0.845
Vehicle weight (kg) 112
Dry weight (kg) 102
Passenger capacity (persons) 2
Fuel economy (km/L) 50.0 (50km/h steady state test value)
Climbing ability (tanθ) 0.50 (approx. 26 degrees)
Minimum turning radius (m) 2.0
Engine type MD07E, water-cooled 2-stroke,
piston reed valve single cylinder
Displacement ( cm3 ) 193
Inner diameter x stroke (mm) 67.0×55.0
Compression Ratio 7.5
Maximum power output (PS/rpm) 26/7,500
Maximum torque (kg-m/rpm) 2.6/7,000
Carburetor Type PE65
Starting method Primary Kick
Ignition method Non-contact CDI
Lubrication Method Separate lubrication type
Lubricating oil capacity (L) 1.2
Fuel tank capacity(L) 9.0
Clutch type Wet type multi-plate coil spring
Transmission type Constant mesh 6-speed return
Gear ratio 1st gear 3.090
2nd speed 1.937
3rd speed 1.368
4-speed 1.090
5-speed 0.916
6-speed 0.769
Caster (degrees) 27°30′
Trail (mm) 112
Tire size before 2.75-21-4PR
rear 4.10-18-4PR
Brake Type before Mechanical Leading Trailing
rear Mechanical Leading Trailing
Suspension method before Telescopic type (used with cylindrical air spring)
rear Swing arm type (Prolink)
Frame Format Semi-double cradle
No comments:
Post a Comment